Experimental Life Meter:

Imagine being able to measure the amount of vital energy present in things around you. This technology can be used to test the vitality of water, compare different people's energy levels, check the energy of different soil samples, or help people learn about energy healing. This technology was developed by Wilhelm Reich to use with his orgone energy (universal life energy) accumulators to measure the amount of energy being produced. New electronics have now made it possible to make a compact version of this meter for use in your home or for research purposes. The meter emits a weak displacement energy field around the electrode and the meter can then indicate the precise energy level of any organic object in front of it. This is an ideal tool for those serious about energy medicine, healing, water research, subtle energy, Qigong, and parapsychology. "Explorers" will find a myriad of other uses and experiments for this technology.

How It Works

A low frequency "displacement current" is connected unipolarly to a sensor which may be a vacuum tube or an insulated metal plate. The "displacement current" field fills the space surrounding the sensor and permeates all objects in its vicinity. The internal circuitry of the meter returns information about the extent of absorption of the excitation field and displays this as a deflection of the meter. Living things absorb more than non living things. The strength of the excitation field is proportional to the surface area that the plate makes with the surrounding space. Thus, metal objects brought near the sensor will cause the reading to increase. Water, which Reich believed to have a high energy content, also reacts strongly. Tests with other energy fields have shown that the instrument is insensitive to magnetic, electrostatic, electromagnetic and nuclear energies. Simple experiments, such as tests performed on plant leaves, have shown that green healthy leaves yield a high reading where as yellowing leaves show less and brown or dying leaves show only a small reading. Even after all objects are moved away from the sensor, a weak fluctuation may be detected and seen on the highest ranges of the device. It would appear that this fluctuation is do to the local Orgone field flux of space itself and may be a proof of the existence of the elusive "ether" or zero point energy.

Specifications and Instructions

The meter is provided with a vacuum tube sensor for general purpose use. This sensor is plugged in at the rear of the device and may be rotated for various types of measurements. For most measurements, the test object may be brought up to the sensor tube and a reading taken either in contact or at a fixed distance. The reading will decrease as the object is moved further away. For consistent readings, always place objects for comparison at exactly the same distance from the tube. For larger distances, the range switch may be moved to a higher position to increase the sensitivity. For the measurement of solutions, the tube may be rotated to point down. A small plastic or glass container may be used to hold the liquid to be tested. A reference liquid such as distilled water should be used to provide a zero point for comparison. Both containers should be of the same size and material and filled to exactly the same volume. The tube should be immersed to exactly the same depth for consistent readings. Take care not to overfill the containers so that immersion of the tube will not cause an overflow. To determine the correct range for measurement, first zero the meter on the x1 range using the coarse and fine zero controls without any objects near the tube. Bring the object to the desired distance, or immersion with the sensor, and observe the meter deflection. If the deflection is less than 10%, select the next highest range and re-zero in the absence of the test object. If the reading is still less than 10% repeat this procedure. If small differences between objects is to be observed, set the range to x10 and set the zero to mid-scale (on the -/ line) while measuring the reference object. Place the test object in place and observe the difference on the meter. If the meter falls to zero or rises to 100, decrease the range and repeat the procedure. If the difference is 5% or less the range may be increased and the procedure repeated. The meter comes with a standard vacuum tube with a 2.25 sq in plate area for general purpose sensing. An external plate may be connected using a standard cable with a banana plug on one end. Two sizes of plates may be used: A 2.25 sq. in plate for short range or small objects and a 2 sq. ft. plate for large objects and maximum sensing distance. Larger plate not included but may be purchased separately from the manufacturer after your purchase.

The latest model is LM4 and features handheld or bench top operation. Requires 4 "AA" batteries (not included). The new rugged design includes a protective rubber boot with a pull-out stand for upright operation. Includes sensor (electrode), sensor plate, instructions, and a one year warranty.

The video below shows good examples of how the Experimental Meter functions and gives some direction for use:

https://www.youtube.com/watch?v=TlDgWYiogeQ

Most shipments will arrive in 4-5 day but please allow 4-5 additional days for delivery.

Accessories:

Interested in getting the most out of your Experimental Life Meter. Get focused feedback from your meter by adding one of the following accessories:

NEW Cornet ED98QPro5G Quad Mode Meter - Includes Hard Shell Case - Released February 2024

What exactly is an Electrosmog Meter?

This device provides homeowners and business owners with essential insights into RF and EMF exposure in their surroundings, aiding in the identification of key sources of electro-pollution. Please note that if you intend to compare your readings with the Institute for Building Biology Guidelines and aim for levels within the no concern range, a more sensitive meter is necessary. For further information, visit our RF Meter or EMF Meter page, or reach out to one of our technical specialists.

Multi-Mode RF Meter With Frequency Display And Data Logging - 5G Ready! Low-Mid Bands

Introducing the Cornet ED98QPro5G (0.1-8GHz) Quad-Mode Electrosmog meter, featuring frequency and real-time waveform displays, data logging capabilities, and an integrated light flicker sensor.

New Feature:

The Light Flicker mode serves as a fantastic tool for assessing LED light flicker issues in residential settings, which can impact human health and are governed by the latest safety standards from the EU, UL, and IEEE1789 in the USA. It's user-friendly and budget-friendly.

Features:

• Measures Radio Frequency between 0.1 – 8 GHz
• Radio Frequency Counter to display dominant source between 100 MHz - 4.2 GHz
• Measures Low Frequency AC Magnetic Fields between 50 Hz – 10 kHz
• Measures Low Frequency AC Electric Fields between 50 Hz – 50 kHz
• Measures Light Flicker rate from modern light sources and digital displays
• Sound signature analysis, with volume control
• Up to 50 hours of RF data logging
• USB interface to PC
• Peak RF power density measurement: 0.5 uW/m2 to 1.8 W/m2
• Max, Average and Hold function (for RF measurements)
• Histogram for RF, LF, and E-field modes
• Ultra-fast colored LED 8x segment level display, for easy signal level indication
• Battery operated (9V DC Alkaline); > 20hours, or external power through USB port (5V)
• Small, compact handheld design: 69mm X 130mm
• 1 year warranty

Additional Features:

The Data Logging interval time has been increased up to 0.001sec.(1msec.) from 0.5sec. The user can now log the data at faster speed to capture the high speed digital RF signal waveform (such as 5G, WiFi, DECT, ....) . It is an excellent tool to view the actual signal waveform of the digital RF signal to identify the signal source. The user can now set the Logging time of (1msec, 0.5sec, 1sec, 10sec, 30sec, 1min, 2min, and 3min) in the Logger setup menu for data Logging. The meter can send it from SRAM Buffer or Flashmem to the PC computer or view it on the LCD display window.

The Statistic mode display window has been improved, the new real time signal waveform display is added to the Statistic data window. the user can now see the actual signal waveform of the RF signal displayed on each screen update. The sampling rate is 42usec/sample and is displayed at 500usec/step for the 0.5sec LCD display update time. The user can use both signal level, frequency, duty cycle and the real time waveform to identify the detected signal. This is very useful for digital RF
signals identification such as 5G, Wifi, DECT, Bluetooth, etc., especially when several different signals are detected within the 0.5sec. LCD display update time, the user will get an inside knowledge of the digital RF signal they are measuring, get the Statistic information of the distribution of the signal levels of each signal and be able to find the best solution for the problem in terms of EMF safety.

Applications:

• RF field strength/power level measurement
• RF Data Logging
• Measuring emissions from cellular phone base stations
• Telecommunications (e.g. CW,TDMA,GSM,DECT)
• Wireless LAN (Wi-Fi) detection, installations
• Spy camera, wireless bug finder
• Cellular/cordless phone radiation safety level
• Microwave oven leakage detection
• AC power line, transformer radiation
• Monitoring personal living environment; EMF safety
• Checking flicker rate of computer/tv screens and LED/CFL Light bulbs

Includes:

• Cornet ED98QPro5G Electrosmog Meter: Qty=1
• User's Guide
• 9 Volt Battery
• Hard Shell Zipper Travel Case (HS1)

Specs:

The GigaHertz Solutions HF35C offers a unique package of basic measurement features at a very affordable price.

Product Features:

• Easy to operate, power the unit on and then walk your meter through your indoor living space. The LCD digital display will allow you to identify peak readings
• Equipped with a sturdy Logarithmic Periodic antenna designed for directional detection of RF waves. Readings increase when the meter gets closer to or points in the direction of offending sources.
• A Course measurement range and Fine measurement range provide added value when needing to assess RF emissions
• Course range covers stronger readings of 1 - 1999 µW/m²
• Fine measurement range of 0.1 - 199.9 µW/m² offers higher sensitivity and allows for accurate detection of lower level signals
• Detects RF radiation generated by cellular and cordless phones (Digital or DECT); microwave ovens; wireless communication devices such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games, smart meters and cell phone towers in the operational range of 700 MHz to 2.7 GHz (GSM, UMTS, 2G, 3G, 4G)
• Detects both analog and pulsed digital signals (1 - 1999 µW/m²)

Extended Range Features:

• Audio Identification: The meter's audio tone replicates the signal patterns and intensity of measured RF emissions and aids in source identification
• Peak Settings and Average Settings: While measurements taken on the Average Value setting provide a basic sense of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects

Product Specifications:

• Frequency Range: 800 MHz - 2.5 GHz
• Measuring Ranges: 1 - 1999 µW/m² Capable of 199,900 µW/m² with the external DG20 Attenuator
• Accuracy: Basic accuracy including linearity tolerance : /- 6dB
• Zero offset and rollover /- 9 digits
• Sensor: Logarithmic periodic antenna
• Audio Analysis: Acoustic signal proportional to the field strength with "Geiger-counter-effect"
• Weight: approximately 10 oz.
• Dimensions: 2.75" W x 9" L x 1.25" H
• Signal rating: Full signal only (Analog plus Digital/pulsed)
• Power supply: 9 Volt alkaline manganese battery (included),
• Average operation time 10 - 12 hours
• Battery Low Indicator: Meter will auto power off 3 minutes following battery low signal display
• Auto Power Off: Saves on battery use will auto power off after 40 min of continuous EMF testing

What's Included:

• HF35C Radio Frequency Meter
• Logarithmic Periodic Antenna 700 MHz 2.7 GHz vertically polarized
• User's Guide
• 2 Year Manufacturer Warranty
• 9 V Alkaline Battery

Calibration:

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every HF35C meter made by Gigahertz has been individually calibrated to a traceable standard. Ships via Standard Delivery

The Safe & Sound Pro II RF Meter is a great all purpose meter and 5G Ready! Low and Mid Bands.

3rd Party Certified RF Detector with +/- 6dB accuracy from 400 MHz to 7.2 GHz, and effective from 200 MHz to 8 GHz!

The premium 4 line OLED Display for digital readings up to 2,500,000 µW/m² and down to 0.005 µW/m², Max Hold, Max Reset Button, USB Power Jack for Continuous Monitoring, Volume Control, Headphone Jack, Calibration Certificate and more! The meter has been tested and certified by The Nemko Canada Inc Testing Lab in Cambridge Ontario, Canada.

Features:

• True response detection range: (400 MHz to 7.2 GHz) +/- 6dB, effective 200 MHz to 8 GHz Accuracy
• Accuracy +/- 6dB performance tested in a 3rd party certified RF testing lab. Each meter is individually calibrated and QC inspected
• Sound signature analysis to assist with source identification
• 3 selectable volume levels + Sound On/Off option
• Low EMF emissions, designed for the Electrically Hypersensitive person in mind
• Premium 4 line OLED Display for a real time display that is easy to read in any type of light
• Uses state of the art measurement technology and is sensitive to 0.001 µW/m²
• Meters are temperature compensated to measure accurately under any environmental conditions
• Power Response linearization completed in a 3rd party certified RF testing lab
• Will measure 5G cellular signals between (200 MHz - 8 GHz)
• Measures power densities up to 2,500,000 µW/m² and down to 0.005 µW/m² (Linear response between 0.1µW/m² and 1,000,000µW/m²)
• Max Hold with option to clear at anytime
• Bar graph of RF intensity
• USB Micro Power Jack for continuous monitoring
• High quality adjustable Volume Control, as well as 3.5mm headphone jack
• Battery remaining display
• Battery operated (2 x AA Alkaline only) - 12 - 15 hour battery life
• Small, durable and compact handheld design - 7" X 4.5" X 1.5" (17cm x 11cm x 4cm)
• Engineered in Canada - Manufactured in Canada and the USA
• 2 Year Warranty

Applications:

Quickly determine RF present in your environment within 200 MHz and 8 GHz.

Some of the more common sources the meter can detect:

• Cell towers
• Cell phone emissions
• Cordless home phones
• Wireless routers (both 2.4 and 5 GHz)
• Bluetooth devices
• Smart meter emissions
• Baby monitors
• Airport radar
• Microwave oven leakage detection

Includes:

• Safe and Sound Pro II RF Meter
• Zippered Carrying Case
• User's Guide
• 2 x AA Alkaline Batteries
• 2 Year Warranty