NEW Cornet ED98QPro5G Quad Mode Meter - Includes Hard Shell Case - Released February 2024
What exactly is an Electrosmog Meter?
This device provides homeowners and business owners with essential insights into RF and EMF exposure in their surroundings, aiding in the identification of key sources of electro-pollution. Please note that if you intend to compare your readings with the Institute for Building Biology Guidelines and aim for levels within the no concern range, a more sensitive meter is necessary. For further information, visit our RF Meter or EMF Meter page, or reach out to one of our technical specialists.
Multi-Mode RF Meter With Frequency Display And Data Logging - 5G Ready! Low-Mid Bands
Introducing the Cornet ED98QPro5G (0.1-8GHz) Quad-Mode Electrosmog meter, featuring frequency and real-time waveform displays, data logging capabilities, and an integrated light flicker sensor.
New Feature:
The Light Flicker mode serves as a fantastic tool for assessing LED light flicker issues in residential settings, which can impact human health and are governed by the latest safety standards from the EU, UL, and IEEE1789 in the USA. It's user-friendly and budget-friendly.
Features:
Measures Radio Frequency between 0.1 – 8 GHz
Radio Frequency Counter to display dominant source between 100 MHz - 4.2 GHz
Measures Low Frequency AC Magnetic Fields between 50 Hz – 10 kHz
Measures Low Frequency AC Electric Fields between 50 Hz – 50 kHz
Measures Light Flicker rate from modern light sources and digital displays
Sound signature analysis, with volume control
Up to 50 hours of RF data logging
USB interface to PC
Peak RF power density measurement: 0.5 uW/m2 to 1.8 W/m2
Max, Average and Hold function (for RF measurements)
Histogram for RF, LF, and E-field modes
Ultra-fast colored LED 8x segment level display, for easy signal level indication
Battery operated (9V DC Alkaline); > 20hours, or external power through USB port (5V)
Small, compact handheld design: 69mm X 130mm
1 year warranty
Additional Features:
The Data Logging interval time has been increased up to 0.001sec.(1msec.) from 0.5sec. The user can now log the data at faster speed to capture the high speed digital RF signal waveform (such as 5G, WiFi, DECT, ....) . It is an excellent tool to view the actual signal waveform of the digital RF signal to identify the signal source. The user can now set the Logging time of (1msec, 0.5sec, 1sec, 10sec, 30sec, 1min, 2min, and 3min) in the Logger setup menu for data Logging. The meter can send it from SRAM Buffer or Flashmem to the PC computer or view it on the LCD display window.
The Statistic mode display window has been improved, the new real time signal waveform display is added to the Statistic data window. the user can now see the actual signal waveform of the RF signal displayed on each screen update. The sampling rate is 42usec/sample and is displayed at 500usec/step for the 0.5sec LCD display update time. The user can use both signal level, frequency, duty cycle and the real time waveform to identify the detected signal. This is very useful for digital RF
signals identification such as 5G, Wifi, DECT, Bluetooth, etc., especially when several different signals are detected within the 0.5sec. LCD display update time, the user will get an inside knowledge of the digital RF signal they are measuring, get the Statistic information of the distribution of the signal levels of each signal and be able to find the best solution for the problem in terms of EMF safety.
Applications:
RF field strength/power level measurement
RF Data Logging
Measuring emissions from cellular phone base stations
Telecommunications (e.g. CW,TDMA,GSM,DECT)
Wireless LAN (Wi-Fi) detection, installations
Spy camera, wireless bug finder
Cellular/cordless phone radiation safety level
Microwave oven leakage detection
AC power line, transformer radiation
Monitoring personal living environment; EMF safety
Checking flicker rate of computer/tv screens and LED/CFL Light bulbs
Includes:
Cornet ED98QPro5G Electrosmog Meter: Qty=1
User's Guide
9 Volt Battery
Hard Shell Zipper Travel Case (HS1)
Specs:
Sensor Type:
Electric field sensor and magnetic field sensor
RF Frequency Range & Sensitivity:
100MHz to 8GHz (0.5uw/m² to 1.8w/m²), (14mv/m to 26.2v/m), (-60dBm to +5dBm))
LF1 Frequency Range & Sensitivity:
50Hz to 10kHz (0.1uT to 60uT)/(1mG to600mG)
LF2 Frequency Range & Sensitivity:
50Hz to 1kHz (0.01uT to 1uT)/(0.1mG to 10mG)
EField/ELF Frequency Range & Sensitivity:
50Hz to 50kHz (10v/m to 1000v/m)
Frequency Counter Frequency Range & Sensitivity:
For RF mode only, 100MHz-4.2GHz, (-35dBm minimum signal input required)
RF Peak Power Measurement:
0.5uw/m² to 1.8w/m²
Display Type:
Digital LCD graphic display
Unit of Measurements:
dBm, mw/m², v/m, uT, mG, MHz
LCD Back Light:
15 seconds auto-off and manual on/off control
Display of Data:
LCD 4 and 5 digit, 8 LED color segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar
3 safety range indication by 3 Red LED, adjustable LED level
Data Logging:
1000 data storage memory cell for RF, up to 50 hours of data can be stored in the build-in memory. Magnetic field level, electric field level can also be logged and transferred to PC computer via USB
Data Logging View:
Data stored in data logging memory can be displayed and reviewed on LCD graphic display window
Statistical Data:
Statistical data of 1000 samples are displayed on window display
Battery Used:
9V alkaline battery or external power supply through USB port (5V) (the USB port does not support battery charging)
A quad-mode EMF detector that measures RF (including 5G), magnetic, and electric fields in one handheld unit. The Cornet ED98QPro5G covers the bands most people care about for home, office, and travel EMF surveys. A practical tool for anyone serious about understanding their environment's electromagnetic exposure.
24999
$249.99
Unit price/ per
No reviews
The ED98QPro5G uses an electric field sensor and magnetic field sensor to detect EMF in multiple frequency ranges. Switch between modes to measure RF (cellular, Wi-Fi, microwaves), low-frequency magnetic fields (power lines, transformers), AC electric fields, or light flicker. The integrated frequency counter and waveform display help identify signal sources, while data logging (up to 50 hours) lets you track exposure over time.
The Cornet ED98QPro5G is a quad-mode electrosmog meter for measuring RF (including 5G low-mid bands), low-frequency AC magnetic and electric fields, and light flicker rate. Released February 2024.
Frequency counter, data logging, and real-time waveform display
USB interface for PC data transfer
Compact handheld design with hard shell case
RF range: 100 MHz – 8 GHz (0.5 µW/m² to 1.8 W/m²)
RF frequency counter: 100 MHz – 4.2 GHz
LF magnetic range: 50 Hz – 10 kHz
LF electric range: 50 Hz – 50 kHz
Data logging: up to 50 hours, 1 ms minimum interval
Size: 69 mm x 130 mm handheld
Power: 9V alkaline battery (>20 hr) or external USB (5V)
Accuracy: RF ±3.5 dB, LF 20%, E-field 25%
Cornet ED98QPro5G electrosmog meter
User's guide
9V battery
Hard shell zipper travel case (HS1)
Backed by a 1-year manufacturer warranty covering defects in material and workmanship.
The Cornet meter is a measurement instrument intended for adult use. It is not a medical or safety-certification device. Keep batteries away from small children. Do not expose the unit to moisture.
What can I measure with it?
RF emissions (cellular, Wi-Fi, microwaves), low-frequency AC magnetic and electric fields, and light flicker rate from modern LEDs and screens.
Is it 5G compatible?
Yes — it detects 5G low- and mid-band frequencies (up to 8 GHz).
Can I log data?
Yes — up to 50 hours of RF data with a minimum logging interval of 1 ms. Data transfers to PC via USB.
Is it sensitive enough for building biology assessment?
For Institute of Building Biology no-concern levels, a more sensitive meter is recommended. Contact our technical specialists for guidance.
